Quote:
Originally Posted by 96sc2
96 sc2 manual transmission --
|
Quote:
Originally Posted by 96sc2
From what I see right now, the motor won't clear the trans input shaft. Is the solution to drop the subframe a bit and move it over, or move the trans alone?
|
The engine will clear the shaft pulling the engine from the top. The shaft is no longer than the bell housing. However, in order to pull the engine with out touching the tranny the pullies have to come off the engine. Other wise you wont have enough room. Other option is to undo the TAM mounts to the tranny and move it towards the driver side but its alot more work as the axles dont have alot of play in them.
Removal of the clutch assembly and fly wheel may also help. Though Im pretty sure the only way is to remove the pulliess
Quote:
Originally Posted by 96sc2
I read from another thread asking about trans replacement that they're replaceable from the driver side wheel well which tells me that the sub frame can stay in place.
|
You can pull the tranny from the wheel well however the subframe
does have to be lowered.
Quote:
Originally Posted by 96sc2
I'm using a floor jack, engine hoist, and jack stands, trying to pull the motor up.
|
Watch these:
YouTube - Engine Removal Saturn S-series (part 1)of 2
YouTube - Engine Removal Saturn S-series (part 2)of 2
Video By richpin
Quote:
Originally Posted by 96sc2
One other question. Does anyone have a source for factory service manuals?
|
Ebayy