hooked up satty

Opusguy · 12-10-2002, 12:14 AM

Ok im talkin abt speed stuff. I dont care about your audio or paint job. Your car can look and sound like ass as long as it's fast. we're talkin straight go fast parts.here.I don't wanna know what so and so down the street or what big company has what,just you.Tell me what ya got, whatcha want and what you really think your gonna get.If you have numbers you can back up post em but only if you have a slip a dyno sheet or a reliable witness =)
I have a 95 sc2 with hot shot intake soon to be replaced with a shaker if XRC ever gets off there ass and gets me one. Port and polished head and intake manifold.2.25 cat back with dynomax super turbo muffler sprint 2 inch drop spring and 205/45/17 kuhmo ecstas on 17 rims. I am planning on gettin a apexi sytem installed as well as custom ground cams but thats a bit in the far future. Im thinkin with the new head and intake i should turn in some respectable times but the piston rings took a dump from the higher compression soooo we have to wait a bit to find out fo sure.

monkeyracing · 12-10-2002, 01:36 AM

XRC is still doggin it huh? I'm not suprised.

Jim

Maxim · 12-10-2002, 03:59 AM

Okay, my list is as follows
I plan on getting a first gen SC2 and rebuild the engine.......
Ross Pistons
either Crower rods 0r 2000+ rods
total seal rings
2 extra fuel injectors
SDS
shot peined (sp)
97 valve springs
most likely a P&P (however this will be later)
of course this is all in preeration for ah (drum roll) TURBO Kit
then all the gauges Oil pressure, Boost, Exhaust temp, Air/Fuel
and a brake upgrade (maybe a rear disc set)

00saturn · 12-10-2002, 04:02 AM

Ok, so I ain't got nothin in the Performance category right now, but I got plans...
Turbo Ecotec swap and AWD. (nuff said)

Wintermute · 12-10-2002, 04:09 AM

Guys,
My as-of-right-now list is the following:

1. K&N Air Intake System
2. Saturn Performance Systems Sparkplug Wires
3. Bosch Platimun Sparkplugs

My Coming Soon list is:

1. Saturn Performance Systems 52mm Throttle Body
2. Saturn Performance System Header
3. Magnaflow Exhaust
4. Denso Iridium Sparkplugs
5. Short-throw Shifter
6. Strut-tower Brace Bar
7. Clutchmaster Stage I Clutch

After all of that, the engine will be as complete as I want it to be

Now, I've told a lot of you I'm going to turbo it, of which I plan on later, but only AFTER I get another engine to rebuild for that!

Josh

ShtNgiT · 12-10-2002, 04:20 AM

MY LIST AS OF 01-03 To be installed, Max and Joey can back me up on this one....

1. 2001 SOHC engine upgrade from TBI 94 SOHC
2. CCA T3 turbo install
3. Quife Differential install
4. Clutchmaster Stage 2 Clutch
5. SPS lightened flywheel
6. Boers Underdrive pullies

Modifications as of present Check out my link below in DTZ for more info:
1. Monkey Racing Intake w/K&N filter and heat shield from radiator.
2. Magnecor 8.5mm wires
3. Dynomax freeflow catalytic converter
4. Borla Catback exhaust
5. Front/Rear Northern Touch anti-sway bars
6. Arospeed adjustable coilovers (2 1/2" currently)
7. 15" Enkie Wheels w/Toyo Proxess directional radials
8. NEW HORN..........hehe
9. Bosch Platinum 4 plugs get me about 45-50 mpg right now

BrenSaSC2 · 12-10-2002, 04:41 AM

Quote:

Maxim
Okay, my list is as follows
I plan on getting a first gen SC2 and rebuild the engine.......

Maxim-you want to buy my 1st Gen SC2? Asking 3600, but I may compromise...

Matt · 12-10-2002, 05:11 AM

Current mods (performance wise):
-Monkey racing intake w/ K&N cone air filter
-NKG v-power plugs
-SPS plug wires
-MOS pullies
-Dynomax st exhaust
-Catco hi-flo converter (will be installed in a couple weeks)

Future mods and plans:
I'm really not sure what I want to do yet. Here's my choices I haven't made up my mind on.

-Either keep the SOHC engine like it is get it built with a good set of pistons and rods, ported and polished head, bore the engine. Then hook up a NX kit with a 75 shot. This could be done for sure by this summer.

-Swap to a DOHC with a 2000 block and '96 head, built with good pistons and rods, ported and polished, turbo or nitrous. This may take a long while for me to do.

CelticShadow · 12-10-2002, 03:02 PM

Go fast stuff? Hmmm...

Injen Intake
HKS Catback Exhaust
Magnacor 8.5mm wires
NGK V-Power Plugs

that's really about it

Joeybagodonuts · 12-10-2002, 04:27 PM

i researched the 00 plus rods, they are NOT ANY stronger as far as rods go, yes, they are fractured at the crank and thus stronger there, but, the rod istlef is not ont iota stronger or thicker then any other stock rod, id go with crowers if building up the engine.
this is not an argument nor an opinion but based on fact, the fractured rods are ONLY stronger at the crank and can bend just as easily as any other saturn rod under boost, nos etc.