How to do dual gauge pod in SL2 ????

98slammedSL2 · 02-18-2007, 03:51 AM

I have looked everywhere for a dual pillar pod for my
98 SL2 and found nothing . What can i do to have dual
gauges for my pillar ? Thanks

Crosby4026115 · 02-18-2007, 04:15 AM

I had one in my old 97SL saturnmotorsports sold it, But i dont think they do any more. The only thing i can sugest is going to like pep boy or autozone and get an APC universal one and modifing that for fitment.

Ryan88 · 02-18-2007, 05:29 PM

Cut and stick! I used small black self tapping screws. It looks pretty good.

vms150 · 02-18-2007, 05:42 PM

S10 pods work

the Shaolin UWP · 02-18-2007, 06:13 PM

so do 87-89 rx7 ones.

I would reccommend against the universal ones...some of them are huuuuge.

Crosby4026115 · 02-18-2007, 06:41 PM

Any modifactions required to either the S-10 or RX7 pillar pods? and what year S-10.

reefer504 · 02-19-2007, 12:02 AM

For the RX-7 pods all you need is to heat it up a little and mold it to the piller.

Crosby4026115 · 02-19-2007, 12:29 AM

perfect.. now i need to get me an RX-7 Pod.

dream36realms · 02-23-2007, 12:36 PM

I just instlalled my 3pod piller last night. It was a 3rd gen RX-7 so they work too. I learned a valuable lesson too, use a heat gun for molding I used a butane torch because the local home depot was sold out of heat guns and I happen to have a buttan torch. make sure you were gloves because hot plastic BURNS. Anyway I used rivets to hold mine together(cutn the back out with a sawzall, looked real good too, untill I descide to dress it up a little and a melted the ehole side so now it is wrinkley. I will be buying a universal now to replace it. I HIGHLY recommend the rivets it looks sooo clean.

98slammedSL2 · 02-23-2007, 06:01 PM

Quote:

Originally Posted by dream36realms

I just instlalled my 3pod piller last night. It was a 3rd gen RX-7 so they work too. I learned a valuable lesson too, use a heat gun for molding I used a butane torch because the local home depot was sold out of heat guns and I happen to have a buttan torch. make sure you were gloves because hot plastic BURNS. Anyway I used rivets to hold mine together(cutn the back out with a sawzall, looked real good too, untill I descide to dress it up a little and a melted the ehole side so now it is wrinkley. I will be buying a universal now to replace it. I HIGHLY recommend the rivets it looks sooo clean.

How bout some pics