tristanlee85

Ok. Recently I figured out how to wires my headlights so that when I turn on my brights, and lo and hi beams come on. Now, in my 97 SC, the wiring in the column for my lights is like so:

orange = common 12V
black = comming ground
blue = lo beam ground
pink = high beam ground
brown = parking lights

Now, I wired up my relay like so:

the ground go to the pink and the other end goes to the orange. since the pink is pos. until the highs are on, the coil isnt energized until i flip my highs on. so then, once the switch is flipped closed, i have one wires comming from black (ground) and the other wires going to blue (low beam)

My headlights work like I want: low = low beams / high = low and high beams

Now, for some reason, those are the only lights that work. the parking lights dont work, but when i turn the blinker on they do, my tail lights dont work except for when I brake or turn signal. The gauges and other lighting in the car doesn't work.

I checked every possibly fuse under the hood and in the car that was possible to find and all was good. What wires control all of these lights I'm missing?

__________________
www.PlastikRacing.net
Saturn Performance Products

sierrap615

you blew the parking light fuse. sorry, i can't remember which one it is.

picksl1

you may have blew the relay too

__________________
Patrick "the irish leprechaun"

Ssicarman

The signal and park lamps (front) are dual filament bulbs. One for the park lights and another filament for the signals. Rear brake and park are dual filament as well.
My first vote is for the park lamp circuit fuse as well.

__________________
A lousy day in Paradise is still a day in Paradise.