Power Windows

scsadjw · 06-02-2004, 09:16 PM

Is it possible for me to convert my car to power windows? I posted a thread awhile back and nobody responded...I have the other car sitting in my driveway and ready to go....The doors kinda suck on it and dont open real well, so i dont want to replace the whole door.. please let me know if any of you have attempted this

dan

afsaturn1 · 06-02-2004, 09:35 PM

Should be able to just replace the inside door panels and then run your switches and then they should hook up some where in your car.

ausgeflippt13 · 06-03-2004, 01:53 AM

if that doesn't work you can buy kits from different places. It won't look as OEM as the above method, but it'll still work.

budiceman0 · 06-03-2004, 02:13 AM

somebody posted not sure if it was you but i responded. just take off the outside skins drill out the rivits from the motor/regulators. on both cars.. either bolt with lock washers or rivit the power ones into your car more or less match up colors to switch.. thats really it im gonna be doing another swap on a 4dr soon. any Q ask away

ice

sswagonss · 06-03-2004, 04:58 AM

Don't forget about relays!!

**Ssicarman** · 06-03-2004, 05:37 AM

For it to be/look stock then it would mean a complete removal from the donor car of all of the power window system parts including main wiring harnesses inside the car to the doors. If you have a complete donor car then you can certainly do it. Would be a lot of work. I would start by stripping out the donor car of the system to see if you want to go up against that in the car that is getting the power windows.

budiceman0 · 06-03-2004, 08:17 AM

Its not much work there is no need to get the whole harness just cut it outside the door so you dont have to use connectors inside the door.
as for relays there is one you can use in the fuse block to power the switches. where the window trelay would be

ice