RiceRocket

How do I get those push clips out without breaking them. They're the barb type, not the ones with the push button.

EDIT: I just read the other post about this and wanted to clearify that there are the kind under the carpet, not under grills. They're also held in by black clips and not screws.

__________________
Think before you type.
Search before you post.
Understand before you accuse.
And never forget, silence is better than misinformation.

KAdams4458

I wish I knew. Yours is a second generation and very different, of course.

If they're like the black plastic ones that hold a first gen door speaker in place, they have a Phillips head and you can unscrew them. (Damn weird, I know, a black plastic screw that goes in to a black plastic expansion sleeve.)

__________________
Keith C. Adams
SPOCWA President

http://www.cardomain.com/id/kadams4458

Robert-sl2

If you are talking about the pins that hold the carpet to the rear deck, that are behind the back seats... Pull 'n Pray.... Thats about it. lol Usually even though the barbs look bent bad, they will go back in and hold just fine unless you snap the whole thing.

__________________
http://cardomain.com/id/97strnsl2 (no longer mine)
Proud Owner of a 2005 Storm Grey Saturn Vue

Coldsolderjoint

yeah, i just ripped out those black plastic thingys that hold the deck speakers in, i used my multitool

__________________
Eddie
SPOC-NJ

picksl1

you can also use a wire cutter and just squeeze them so they pop out and pry them out....just DONT SQUEEZE TOO HARD YOU CUT THEM IN HALF

__________________
Patrick "the irish leprechaun"

CrtTop99

Or you can stick a screwdriver underneath it and pry it up by turning the screwdriver so its perpindicular to the deck. This puts the pin at no risk of breaking.

-Scott

__________________
The stupidest thing I have ever heard: "almost anything can push 500hp on a stock block, you can modify any car" - DCxMagus